Overview

IPOC1KPT is Ethernet and power signal transmitter over single coaxial cable. The IPOC1KPT is used with IPOC1KR, which is an ideal solution for reconstruction of old projects without any change of existing coaxial cable. You needn't change coax into network cable when you want to change analog cameras into IP cameras. Both of Ethernet and power transmission distance reach max up to 1000meters. The IPOC1KPT is able to provide power to POE cameras over network cable and it is able to provide power to NONE-POE cameras, too.
With high speed modern technology, the physical bandwidth is up to 100Mbps (bidirectional). The IPOC1KPT is built-in multi-stage surge and lightning protection protect video equipment against damaging voltage spikes and providenoise immunity to ensure quality signals without disturbing "hum-bars".
The IPOC1KPT is widely applied to the fields such as network expanding system, network security system, network information distribution system, network upgrading & expanding system, railway and urban transportation, metallurgy and mining, field operations, etc.

Feature

Single Channel Ethernet and Power Receiver over Single Coaxial Cable

Technical Specifications

Applications

Application Diagram

Q: What is the maximum units I can cascade the transmitter and receiver?

A: Due to the limitation of the bandwidth, it is suggested to use one Transmitter to one Receiver if all the Receivers are less than 5m apart, if the receivers can be 10m apart, 3x Transmitters 1 x Receiver can be used, if all the receivers are located in different level/floor of the building, you can use as many as 10 pairs.

Q: What is the difference between the transmitter and receiver?

The transmitter is connected to the IP camera side, nopower supply required; the receiver is connected to Switch or NVR side, it requires the POE power.

{/tabs} {tab Downloads}

Product Manual PDF file

CASCADE CONFIG INSTRUCTION - IPOC1KPT_IPOC1KR_CASCADE_CONFIG INSTRUCTION.docx

Installer Compressed file