{tab Overview}
1.2mm STP RJ45 CAT6 SNAP PLUG SHIELDED EXTERNAL GROUND – Pack of 50
The T3 Snap Plug™ and Snap Plug Tool is designed to simplify the process of terminating RJ45 modular plugs. It is a time-consuming process to assemble traditional RJ45 modular plugs, and the most difficult part would be puttingthe wire into the conductor incorrect order. The thicker the conductor is, the more difficult the job is going to be.
The T3 Snap Plug™ enables the conductors to pass through the connector itself, making it a lot easier to verify wiring order before crimp, reducing possible errors and waste of materials.
- Shielding shell with the external ground and RJ45 connector 2pc type
- Pack of 50pcs
- Max conductor size: 1.2mm / 0.047"
- Solid or stranded cable: 23 AWG
- Cat6a & Cat6 STP 2pc, 3 prongs
- 50u fully gold plated RJ45 pin contacts
- Meets ANSI/TIA specifications
- Compliant with POE and POH standards
- UL RoHs FCC compliant
Note: You may have the ethernet cable specified CAT6 or CAT6A, because we found the cable conductors used are very different from different manufactures or brands, if you want to make sure the snap plug works properly, please double-check the cable conductors’ size is not larger than the size that the snap plug specified.
{tab FAQ}
Q: I have a Platinum Tools crimper EZRJPROHD that was designed for the Platinum Tools EZ connectors. Can I use this crimper on the T3 Snap Plug?
A: The T3 products are designed with tight tolerances to work perfectly together. Platinum Tools manufacture their EZ plugs in the US as opposed to Taiwan, so their matching crimper is designed to work with just their connectors. Having said this, in our samples, the Platinum crimper still worked with T3 connectors.
Below is a picture of the end result. Note the slight indentation (damage) on the T3 connector left by the Platinum Tools crimper. Please be aware, as the crimp tool is not designed for other plugs, if you use it very often, your crimp tool will be worn out quickly.
{/tabs}
{tab Video}