Can't find what you're after? Use the Support link on the bottom right or give our expert team a call on (03) 9321 8300
Search our range of quality products...
Can't find what you're after? Live Chat or give our expert team a call on 1800 337 366

PA AMP ACCESSORIES

TRADE ALERT!
True 1
RMA16 volume control. 100 Volt line 6x 100 Watts Off position 10 Volume steps
$675.00
Special Buy-In
View Product Increase value Decrease value
TRADE ALERT!
True 1
Insert into a WT482 or add wireless capabilities to your WA1822. Diversity Tuner Module F01:636-666MHz Frequency Range
$459.00
Special Buy-In
View Product Increase value Decrease value
TRADE ALERT!
True 2
Rack Bracket Kit for single unit
$39.00
Special Buy-In
View Product Increase value Decrease value
TRADE ALERT!
True 1
Rack mount brackets for Show MPA/MA Series 2RU Amplifiers.
$17.45
In Stock
Increase value Decrease value
TRADE ALERT!
True 1
The AN-001T is a 2ch plug-in ambient noise detector for use in the 9000 series amplifiers Automatically adjusts gain to compensate for changes in ambient noise level Each input can be assigned to control a specific output 24VDC phantom power for condenser mics 14 preset gain ratios
$549.00
Special Buy-In
View Product Increase value Decrease value
TRADE ALERT!
True 1
Rack Mounting Brackets for A9II, A2, A17, A18 series Amps (2RU).
$29.00
Low Stock
Increase value Decrease value
True 1
Screw terminals for 100V input 3-Pin XLR mic socket 2x RCA auxiliary socket Requires no power
$126.50
Low Stock
Increase value Decrease value
TRADE ALERT!
True 2
The Zoned Out is a simple way to have up to 6 zone output zone switching in your installation. 100 Volt output switcher 6 Zone outs
$130.00
Call for Availability!
Increase value Decrease value
TRADE ALERT!
True 1
The JUICED UP is a 2 channel phantom power supply that features balanced XLR inputs and outputs per channel. Operates via the supplied external power supply or two on-board 9 Volt batteries Will supply 12V DC phantom power from battery power and 42V DC phantom power from an external power supply
$175.00
Low Stock
Increase value Decrease value
TRADE ALERT!
True 2
Compact yet highly featured microphone pre amplifier. 40VDC phantom power Microphone/Line Pre amp Switchable High Pass Filter Balanced XLR output
$175.00
Special Buy-In
View Product Increase value Decrease value
TRADE ALERT!
True 2
The LETS SPLIT (M) is a balanced microphone level splitter with a balanced XLR microphone level input which provides both a transformer balanced XLR output and a thru (direct) XLR output of the input signal. Provides a ground lift switch to eliminate ground loop hum. Microphone level splitter Direct and transformer balanced outs
$150.00
Special Buy-In
View Product Increase value Decrease value
TRADE ALERT!
True 1
"Hum" noise is a common problem in sound systems, even with the volume control set at minimum level. The HEB-100 is a low-cost tool that you can use to prevent the "hum" caused by ground loop. This unit can also act as a converter of unbalanced signals.
$99.00
Low Stock
Increase value Decrease value
True 2
3 pin female XLR to unbalanced 1K Ohm 2 x RCA with level control.
$43.50
In Stock
Increase value Decrease value
True 2
Unbalanced 10K Ohm2 x RCA to balanced 600 Ohm 3 pin male XLR with level control. -10dB max signal gain.
$39.95
Low Stock
Increase value Decrease value
TRADE ALERT!
True 3
The MQS75 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. It is the ideal solution for connecting audio sources like CD players, camcorders etc to professional devices like mixing boards, signal processors and associated amplifiers. Acts as a balanced XLR line level control Individual volume level controls for line 1 and 2 RCA to XLR and XLR to RCA conversion
$109.00
In Stock
Increase value Decrease value
TRADE ALERT!
True 2
For running two mixers from the one microphone ? for example broadcast and PA. Input impedance: 600andOmega; Output impedance: 600andOmega; Dimension: 95x73x40mm Weight: 305.5g
$49.90
In Stock
Increase value Decrease value
TRADE ALERT!
True 2
Australian Monitor Buzz Off contractor tool. Two channel Balanced (XLR) and unbalanced (RCA) ins & outs
$185.00
Low Stock
Increase value Decrease value
TRADE ALERT!
True 2
Change mic level to line level
$150.00
Low Stock
Increase value Decrease value
TRADE ALERT!
True 2
For when you need to connect a low-impedance or condenser microphone to a high-impedance mixer input, a PC sound card, a powered speaker or possibly an instrument amp. Input Impedance: 10kandOmega; THD: <0.01% IMD: <0.01% Output gain: 50dB (XLR), 44dB (6.3mm)
$99.00
Low Stock
Increase value Decrease value
True 2
The MQS52 features a full selection of standard pro audio connectors for testing the five basic types of cables used widely in pro audio. Jacks: XLR, Phone Jack, Stereo RCA, DIN Dimension: 113x73x40mm Weight: 367.5g
$39.00
DON'T PAY $49
In Stock
Increase value Decrease value
True 3
Stereo Line RCA input and output Easy operation for Audio players, powered speakers or amplifiers Infrared remote control in tiny size Adjust Volume level and mute on/off
$89.00
Call for Availability!
Increase value Decrease value
TRADE ALERT!
True 1
2-Channel signal outputs Signal noise eliminator Adjustable output level Auto remote amplifier turn-on
$40.45
DON'T PAY $49.95
In Stock
Increase value Decrease value
True 4
Dedicated rack-mount kit for MA23 and PA23. Holds 2x MA2030/PA2030 amps
$124.30
Special Buy-In 2 IN STOCK
Increase value Decrease value
True 1
The MBS1xx is a series of installation accessories for use in combination with the AUDAC S-Box products range. MBS101R - Mounts one unit into a 19 equipment rack (1 HE)
$45.00
Special Buy-In
View Product Increase value Decrease value

Be the first to hear about it!